The NEO 2100 Waterway control system has an integrated 3 kW heater, and can handle a very wide variety of hot tub configurations, with different numbers of pumps. It works with the NEO 1100 keypad for relatively simple spas, and the NEO 2100 for more complex installations.
This base system covers most needs, but you can extend the system's capabailities with a DB1 or DB2 extension board, and/or a splitter cable.
The base NEO 2100 system without expansion board can handle the following elements:
With a circulation pump:
A 24-hour circulation pump
Up to two dual-speed pumps OR one dual-speed pump and one single-speed pump OR three single-speed pumps
Without a circulation pump
One two-speed pump
Another two-speed or single-speed pump
A third single-speed pump OR blower
Use AMP plug to connect each device (pump, ozonator, projector, etc.) to the control box.
Heater length: 381 mm (a fairly standard size, similar to Balboa systems, for example)
Case width: 430 mm
Housing height: 310 mm
Case depth: 120 mm
Heater connection: Unions for 2-inch pipe (diameter 60 mm). The split nuts and gaskets are supplied with the system.
Keyboards NEO 1100 only for cases without expansion board and NEO 2100.
1 year, directly provided by tubs. fr