Wellis 2" jet socket assembly - LED

This clear socket by Rising Dragon for Wellis spas works with 2-inch spa jets to combine massage and lighting, by inserting the LED into the back of the socket.

The socket attaches to the spa shell, and the nozzle fits inside. The fixing nut and gasket are supplied with the socket.

The flow of water through the nozzle draws in air through the Venturi effect, adding bubbles to the water jet and increasing the power of the massage. The air inlet of each nozzle is normally connected to a common manifold, and then to a valve, so that the air/water mixture in the jets can be modified. If you don't want bubbles in the water jets, plug the air inlet.

Dimensions
Drill diameter: 37 mm
Front face diameter: 50 mm
Overall length: 75 mm

Pipe connections
Water: Smooth fitting for 3/4-inch pipe
Air: Smooth fitting for 3/8-inch pipe

Part numbers
Wellis : AJ00226SET