TS-07 cover lifter

The TS-07 is a manual cover lifter designed to make opening and closing your spa cover easier. It follows the same principle as the CoverMate I, with a simple and efficient design, making it a practical alternative for square or rectangular spas.

It is installed using two mounting plates screwed directly into the spa cabinet. Once in place, the cover folds onto itself and is then rotated into the lifter’s arms. When open, it rests vertically against the side of the spa.

The TS‑07 is compatible with most square or rectangular spas up to 240 cm wide. Like the CoverMate I, it is particularly suitable for installations with limited space. The required clearance behind the spa depends on the height at which the mounting brackets are positioned on the spa cabinet. For example, if you place the brackets 20 cm from the top of the spa shell, allow approximately 23 cm of clearance at the back. If the brackets are placed 30 cm from the top, plan for a clearance of around 38 cm.

Check your spa’s dimensions and available clearance before installation. If you have any questions, our team is at your service.

Type: Pivoting bar
Montage: Spa cabinet
Space required: 20 cm to 38 cm
Hot tub shapes: Square and rectangular
Maximum width: 240 cm (8')
Maximum weight of the cover: 25 kg