Astrel Easy Heater Titanium with 2-in-1 sensor

This next-generation Astrel heater replaces the previous version, which is no longer manufactured. The two models are interchangeable, but you have to pay attention to the type of flow detection that you need. In particular, Astrel no longer offers a heater with pressure switch mounted directly on the heater tube. Contact us if you need to replace a heater of this type.

The heater comes with a Titanium heating element (available separately in 2 kW and 3 kW versions) and is equipped with a "2-in-1" sensor that serves as both a main temperature sensor and a overheat protection, and is used to detect situations when the flow of water through the heater is too low. As a result, it has neither a flow switch or a pressure switch.

The two plugs on the sensor cable connect directly to Astrel control systems, such as the Easy Mini and Easy Nova.

This heater runs on single-phase power, and is available in 2 power ratings: 2 kW and 3 kW.

We also offer this heater with a flow switch.

Dimensions
Length: 300 mm, without connectors and gaskets
Usually connected to 2-inch pipes

Warranty
2-year Tubs Parts warranty

Astrel part numbers
2 kW: PFEAT2110000 (formerly PFEAR3110000 and replaces models that start with PFEAR33...)
3 kW: PFEAT3110000 (formerly PFEAR2110000 and replaces models that start with PFEAR23...)
More information on Astrel part numbers

Other part numbers
Therm Products: C2300-2312 (3 kW)
Jacuzzi & Teuco: 919403260 (2 kW)