Waterway Cluster Storm thread-in jet socket

This jet socket is suitable for all Waterway's Cluster Storm thread-in jets. The socket is attached to the spa shell and the jet back is screwed in. The fixing nut and gasket are supplied with the sleeve.

The water flow through the socket draws in air through the Venturi effect, which adds bubbles to the water jet and increases the power of the massage. The air inlet of each jet is normally connected to a manifold, and then to a valve, so that the air/water mixture in the jets can be modified. If you do not want bubbles in the water jets, block the air inlet with this cap.

Dimensions
Drill diameter: 38 mm with a flat gasket or 40 mm with an L-shaped gasket
Inner diameter: 25 mm
Outside diameter: 50 mm
Length: 71 mm

Hose connections
Water: 3/4-inch flexible pipe
Air: 3/8-inch flexible pipe

Part numbers
Waterway: 228-1550G
Sunrise Spas : R3035400