We will be closed on Easter Monday, April 1st. Our team will be back on Tuesday, April 2!

HydroAir extended wall fitting

In stock
7,50€
incl. 20% VAT
Colour
Quantity:  
HydroAir extended wall fitting - Click to enlarge
HydroAir extended wall fitting - Click to enlarge
HydroAir extended wall fitting - Click to enlarge
HydroAir extended wall fitting - Click to enlarge

This Balboa HydroAir extended wall fitting is well-suited to thick-walled spas (up to 50 mm), such as wooden hot tubs.

If your wall thickness is less than 35 mm, do not forget to add a nut with one of the adapters mentioned above. The female thread on the adapter is not long enough to crimp the part against the wall.

For shells that are less than 15 mm thick, use a short-threaded wall fitting instead.

Installation
You should install it with a gasket and also use silicone between the wall fitting and the interior wall of the spa.

Dimensions
Hole width to drill (external thread diameter) : 60 mm
Maximum wall thickness: 50 mm
External diameter of the face of the fitting: 85 mm
Inside diameter of the face of the fitting: 45,5 mm
Inside diameter connection: 48 mm, for 1.5-inch pipe

Part numbers
Balboa HydroAir : 10-3803 or 30-3803


Parts to use with this wall fitting

 3,00€ 
In stock
 8,70€ 
In stock
 13,50€ 
In stock