Aqua-Flo Circ-Master CP pump

The wet end of the Aqua-Flo Circ-Master CP (CMCP) pump has a return (outflow) that is centrally positioned, directly above the suction connection, unlike its cousin the Circ-Master HP (CMHP), which has a return to the side. Both pumps use the same motor: an Emerson US Motor 1/15 HP.

Dimensions
Length: 330 mm
Width: 200 mm
Height: 210 mm

Technical specifications
Power: Approximately 140W (1/15 HP according to the motor plate)
Speed: 1425 rpm
Maximum flow rate: 150 litres/minute

Pipe connections
Threaded male connectors with an outside diameter of 62 mm (1.5" MBT thread). Unions are available for 1,5" (48 mm) pipe.

Cable and plug
The pump is supplied pre-cabled with an AMP plug (length 210 cm). You can also have it pre-cabled by our team with a mini J&J plug.

Spare parts
We have a wide range of spare parts for this pump in stock.

Warranty
2-year Tubs Parts warranty

Part numbers
Aqua-Flo: 02593657-2, 02920006-2010 (CMCP)
Sunrise Spas: R5021352

This very popular pump is used by many brands of spas under different part numbers, listed below. Some models have been replaced over the years, resulting in a change in the design of the wet end and therefore the pipe connection. Check your pump to be replaced with this model, or contact us.

02093001-2010	02093001-2	02093002-2	02093003-2	02093004-2
02093006-2	02093012-2 Green	02093466-2	02093634-2	02093639-2
02093646-2	02093649-2	02093658-2	02093670-2	02093678-2
02093	02093695-2	02093759-2	02096281-2	02407670-2
02408492-2510	02410388-2	02410512-2	02410701-2	1-00-0204
14154	34-402-1140	6500-907	6000-907