303 Fabric Guard for outdoor fabrics

In stock
303 Fabric Guard for outdoor fabrics - Click to enlarge

303 Fabric Guard allows you to restore lost water and stain repellency of your fabrics, like your Sunbrella cover. Sunbrella fabrics are treated with a proprietary water and stain repellent finish that is designed to last for several years, but may require replenishing after a thorough cleaning... 303 Fabric Guard will then be very helpful !

It offers unbeatable protection against soiling, water-based and oil-based stains, and is safe enough to use on the most delicate of fabrics.

303 Fabric Guard :

  • Greatly increases stain resistance
  • Maintains colorfastness
  • Keeps fabrics soft and breathable
  • Is safe for synthetic and natural fibers
303 Fabric Guard can be used on all types of fabrics, including natural fibers & synthetics. Great for use on your outdoor pillows and cushions, fabric awnings or canopies, umbrellas...

How to use it
Use only on newly, cleaned, dry fabrics. For best results, treat fabrics in warm weather, of at least 70°F/21°C or warmer (for quicker drying/curing and best results, apply in full sun). In a well-ventilated area, apply 303 Fabric Guard on fabric until damp, overlapping in a crisscross pattern. Do not saturate. Let dry for 6-12 hours in a clean, dry environment before using or storing. Curing: 12-24 hours dependent on temperature.

If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.

Note: Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303 Fabric Guard. Spray until evenly wet, overlapping sprayed areas.

473 ml

Part numbers
303® : 30605

You may also be interested in these products