Complete wet end for 56-Frame Waterway Executive Euro pumps, complete with volute, impellor, seal, face plate and o-ring.

This wet end is compatible with all the various 56-Frame motors used in the Waterway Executive Euro range, both single-speed and two-speed.

The wet end is available with a choice of four different impellers, which are confusingly called 2HP, 3HP, 4HP and 4HP.  Be careful: the names correspond to the American versions of these pumps.  The correct turbine will indicate a higher power rating than your pump motor !  To choose the right model, look for a reference on your old wet end or impellor, not on the motor.  Contact us in case of doubt.

Pipe connections
Two sizes of suction are available : the screw thread can have an external diameter of either 78 mm or 97 mm.

Waterway part numbers
Complete wet end: 310-1440, 310-1480, 310-1500, 310-1510, 310-1720, 310-1730, 310-1740 or 310-1750, depending on configuration.
Volute: 315-1220
Faceplate : 311-1220 (78 mm) or 311-1210 (97 mm)
"5HP" impellor: 310-4180
"4HP" impellor: 310-4190
"3HP" impellor: 310-4200
"2HP" impellor: 310-4210
Wet end seal: 319-3100B

All these parts are also available separately - please contact us for more information.